Price: 861.55
Normal 0 0 1 97 555 4 1 681 11.1539 0 0 0 Up for auction is a 2010 Gibson SG Standard in great condition. This all original beauty plays effortlessly with superb tone and sustain. There are no splits, cracks, breaks or repairs anywhere, just light to moderate play wear with a few scratches, some worming on the back and a ding at the bottom of the body (pictured). The action is low, the neck is straight and the frets are in great condition. Comes with the original hardshell case. Serial number is 106300653. Weight is 7.5 pounds. Please feel free to e-mail me with any questions after viewing all of the photos. International shipping rates are listed below. Good luck!A new classic for rocking the 21st century. The Gibson SG Standard electric guitar has a slim, lightweight mahogany body with the unmistakable twin cutaways, pointed horns, and beveled edges; the fastest neck in the business;and a pair of Gibson's screamin' BurstBucker pickups with coil-splitting for single-coil tones. This beauty also features trapezoid inlays along its elegantly bound 22-fret ebony fingerboard while a fine mother-of-pearl Gibson logo and holly inlay decorate the guitar's headstock. Solid Mahogany Body Probably the most central of all Gibson SG features is its solid mahogany body. The mahogany goes through the same rigorous selection process as all of Gibson's woods, and is personally inspected and qualified by Gibson's team of skilled wood experts before it enters the factories. Inside the Gibson factories, humidity is maintained at 45 percent, and the temperature at 70 degrees. This ensures all woods are dried to a level of equilibrium, where the moisture content does not change during the manufacturing process. This guarantees tight-fitting joints and no expansion, and controls the shrinkage and warping of the woods, in addition to reducing the weight. It also improves the woods' machinability and finishing properties. Consistent moisture content means that the Gibson SG will respond evenly to temperature and humidity changes long after it leaves the factory. '50s Rounded Neck Profile No guitar neck profiles are more distinctive than the neck profiles employed on the Gibson models of today. The more traditional '50s neck profile â€" found on the SG Standard â€" is the thicker, rounder, more time-honored profile, emulating the neck shapes of the iconic late '50s Gibson models. The neck is machined in Gibson's rough mill using wood shapers to make the initial cuts. But once the fingerboard gets glued on, the rest â€" including the final sanding â€" is done by hand. That means there are no two necks with the exact same dimensions. So while it still has the basic characteristics of its respective profile, each neck will be slightly different, with a distinct but traditional feel. Set-Neck Construction Like all classic Gibson guitars, the necks on SGs are distinguished by one of the more traditional features that have always set them apart â€" a glued neck joint. Gluing the neck to the body of the guitar ensures a "wood-to-wood" contact, no air space in the neck cavity, and maximum contact between ... Click for more info
Listing Ends: 02:53am UTC Sep. 06, 2012
Không có nhận xét nào:
Đăng nhận xét